Need help?Do you have a question about the Yamaha EM-150 and is the answer not in the manual?
Describes the AC power input socket and its availability in certain regions.
Details the fuse type and replacement procedure, emphasizing using the same value.
Identifies the main power switch for turning the unit on and off.
Specifies the output jacks for connecting speakers, noting impedance requirements for compatibility.
Provides mixed signal output for external amplification systems like music amps.
Outputs signal for recording devices, also serving as inputs from other EM units.
Input jacks for connecting external audio sources like record players or tape playback.
Designated jacks for connecting external echo units, facilitating signal processing.
Explains two methods for connecting a second EM-150 unit to expand channel capacity.
Details the three settings (LINE, INST., MIC.) for various audio input sources.
Allows division of channel input between left and right outputs for stereo balancing.
Controls for blending reverb effect and configuring echo via external units.
Individual Treble and Bass controls for each channel to shape the frequency response.
Each channel has an independent volume knob to adjust the output level.
Six input jacks for connecting various audio sources to the mixer channels.
Displays the output signal level of the unit from speaker jacks, indicating potential distortion.
A 7-band graphic equalizer for adjusting frequency response and suppressing feedback.
Adjusts the volume of signals from the Aux. jacks to speaker and phone outputs.
Controls the overall intensity of the reverb or echo effect applied to the mix.
Manages the combined volume of signals sent to the Monitor Out output.
Controls the final combined volume of signals going to speaker and headphone outputs.
A stereo jack for connecting headphones for monitoring purposes.
Adaptor plug for connecting a pin plug to a telephone jack.
Connector cord with pin plug and pin jack/telephone jack for stereo connections.
Connector cord with pin plug and two telephone jacks for connecting to multiple lines.
Cord with pin plug and telephone plug for connecting pin jack and telephone jack.
Cord with pin plug to telephone jack for connecting to telephone cords.
Double connector cord with two pin plugs and two telephone plugs for stereo use.
Double connector cord with four pin plugs for connecting two sets of stereo pin jacks.
Device providing six headphone jacks for group monitoring.
A compact mixer with four inputs for expanding input capabilities.
Describes the AC power input socket and its availability in certain regions.
Details the fuse type and replacement procedure, emphasizing using the same value.
Identifies the main power switch for turning the unit on and off.
Specifies the output jacks for connecting speakers, noting impedance requirements for compatibility.
Provides mixed signal output for external amplification systems like music amps.
Outputs signal for recording devices, also serving as inputs from other EM units.
Input jacks for connecting external audio sources like record players or tape playback.
Designated jacks for connecting external echo units, facilitating signal processing.
Explains two methods for connecting a second EM-150 unit to expand channel capacity.
Details the three settings (LINE, INST., MIC.) for various audio input sources.
Allows division of channel input between left and right outputs for stereo balancing.
Controls for blending reverb effect and configuring echo via external units.
Individual Treble and Bass controls for each channel to shape the frequency response.
Each channel has an independent volume knob to adjust the output level.
Six input jacks for connecting various audio sources to the mixer channels.
Displays the output signal level of the unit from speaker jacks, indicating potential distortion.
A 7-band graphic equalizer for adjusting frequency response and suppressing feedback.
Adjusts the volume of signals from the Aux. jacks to speaker and phone outputs.
Controls the overall intensity of the reverb or echo effect applied to the mix.
Manages the combined volume of signals sent to the Monitor Out output.
Controls the final combined volume of signals going to speaker and headphone outputs.
A stereo jack for connecting headphones for monitoring purposes.
Adaptor plug for connecting a pin plug to a telephone jack.
Connector cord with pin plug and pin jack/telephone jack for stereo connections.
Connector cord with pin plug and two telephone jacks for connecting to multiple lines.
Cord with pin plug and telephone plug for connecting pin jack and telephone jack.
Cord with pin plug to telephone jack for connecting to telephone cords.
Double connector cord with two pin plugs and two telephone plugs for stereo use.
Double connector cord with four pin plugs for connecting two sets of stereo pin jacks.
Device providing six headphone jacks for group monitoring.
A compact mixer with four inputs for expanding input capabilities.
General| Type | Analog Mixer |
|---|---|
| Channels | 6 |
| Microphone Inputs | 2 |
| Line Inputs | 4 |
| Inputs | 6 |
| Phantom Power | No |
To Next Page
