M
Melissa FlemingJul 28, 2025
How to fix loose connections on a Yamaha EMX860ST Music Mixer?
- BBridget PetersonJul 28, 2025
Inspect all connections to your Yamaha Music Mixer and correct any that are faulty or loose.
To Next PageTo Next PageHow to fix loose connections on a Yamaha EMX860ST Music Mixer?
Inspect all connections to your Yamaha Music Mixer and correct any that are faulty or loose.
General| Type | Powered Mixer |
|---|---|
| Number of Channels | 8 |
| Microphone Inputs | 4 |
| Line Inputs | 4 |
| Stereo Inputs | 2 |
| Weight | 9 kg |
| Power Output | 600 W |
| EQ | 3-band |
| Effects | Built-in effects |
Critical safety warnings covering water exposure, power cord handling, object placement, and unit abnormalities.
Operational cautions regarding ventilation, speaker cables, and handling power plugs with wet hands.
Advice on minimizing noise interference from digital circuits and mobile phones, and component wear.
Highlights core capabilities including 8 input channels, powerful amplification, graphic EQs, and built-in digital effects.
Adjusts equalization, volume, effect, and monitor output for each input channel.
Enables and selects built-in digital effects like reverb for vocals and halls.
Controls the signal level sent to external effect devices via the EFFECT OUT jack.
Adjusts monitor bus tone, volume, and the mix level for the built-in digital effect.
Adjusts main bus tone, volume, and mix levels for internal and external effects.
Selects output signals for the power amp and chooses the BRIDGE mode for increased power.
Indicates power status and provides a switch for +48V phantom power for microphones.
Detailed guide to all input and output jacks on the mixer, including microphone, line, and speaker connections.
Explains the connections available on the rear panel, including speaker outputs and the power switch.
How to connect monitoring speakers, specifying impedance requirements for one or two speakers.
Instructions for connecting main speakers to L/R or L+R BRIDGE jacks, depending on stereo or bridge mode.
Details for connecting speakers in two-channel stereo mode, specifying impedance for L/R jacks.
Details for connecting speakers in bridged monaural mode, specifying impedance for the L+R BRIDGE jack.
Illustrates connecting the mixer for a conference or installed sound system with separate monitor mixes.
Demonstrates using the mixer for a band PA, including connections for microphones, instruments, and external effects.
Step-by-step guide for connecting microphones and instruments and powering on the unit.
How to adjust the monitor section to send an independent mix to monitor speakers.
Guide to connecting sources, activating, and selecting types of built-in digital effects.
Overall technical data including output power, frequency response, dimensions, and weight.
Detailed electrical parameters for all input jacks, such as impedance, sensitivity, and max input levels.
Detailed electrical parameters for all output jacks, such as impedance, nominal output levels, and max output levels.
Provides the physical measurements (width, height, depth) of the EMX860ST unit.
Visual representation of the mixer's internal signal flow and audio level paths.
