Trouble Recovery
84
5. Remove the starter/flywheel cover after
removing the bolt(s).
6. Secure the electrical system plate by
tightening the bolt(s), and fix the plate.
7. Prepare the engine for starting. For fur-
ther information, see page 39. Be sure
that the gear shift is in neutral and that
the clip is attached to the engine shut-off
switch. The main switch must be āā
(on), if equipped.
ZMU05613
ZMU05624
ZMU05614
ZMU05615
ZMU05616
To Next Page
Loading...
