What to do if Yamaha F20BEP trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha F20BEP boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
General| Max Output | 20 hp |
|---|---|
| Fuel System | Carburetor |
| Cooling System | Water-Cooled |
| Starting System | Electric |
| Gear Ratio | 2.08:1 |
| Full Throttle RPM Range | 5000 - 6000 rpm |
| Steering | Tiller |
| Trim Method | Manual |
| Oil Pan Capacity | 1.1 L |
| Shaft Length | 20 inch |
| Alternator Output at W.O.T. | 12V |
| Engine Type | 4-Stroke |
Details the steps for safely removing the outboard motor from its crate.
Explains how to properly mount the outboard motor onto the boat transom.
Offers guidance on choosing the correct propeller for optimal performance.
Explains the features and electrical functions of the multi-function tiller handle.
Details applications, dimensions, and setup for the fuel management gauge.
Recommends suitable batteries based on model and conditions.
To Next Page
