What to do if Yamaha F225AET Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha F225AET boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
General| Engine Type | 4-Stroke |
|---|---|
| Gear Ratio | 1.86:1 |
| Starting System | Electric |
| Full Throttle RPM Range | 5000 - 6000 rpm |
| Alternator Output at W.O.T. | 50 Amp |
| Steering | Remote |
| Exhaust | Through propeller |
| Recommended Fuel | Regular unleaded |
| Displacement | 3349 cc |
| Max Output | 225 hp @ 5500 rpm |
| Fuel System | EFI (Electronic Fuel Injection) |
| Cylinder Arrangement | V6 |
| Shaft Length | 20 inch |
Procedure for safely uncrating the outboard motor from its steel frame.
Guidelines and steps for correctly mounting the outboard motor onto the transom.
Guidance on selecting the most suitable propeller for various applications.
Overview of different Yamaha remote control applications and models.
Description of the 6X4 multi-function tiller handle.
Details on analog tachometers, applications, and dimensions.
Details on digital tachometers, applications, and dimensions.
Details on speedometers, applications, dimensions, and setup.
Details on fuel management gauges, applications, and setup.
Details on analog trim meters, applications, and adjustments.
Details on coolant pressure meters, applications, and installation.
Details on coolant temp meters, applications, dimensions, and installation.
Details on hour meters, applications, dimensions, and wiring.
Details on voltage meters, applications, dimensions, and wiring.
Details on fuel meters, applications, dimensions, and wiring.
Details on charge warning units, applications, and wiring.
Collection of wiring diagrams for gauges and systems.
Troubleshooting common issues with digital network gauges.
To Next Page
