3-11
GB
EMU01366
Manual Start Model
7) Pull out the choke knob completely.
NOTE:
It is not necessary to use the choke when
restarting a warm engine.
8) Pull the starter handle slowly until
you feel resistance. Then give a
strong pull straight out to crank and
start the engine. Repeat if necessary.
9) After the engine starts, return the
starter handle slowly to the original
position before releasing it.
NOTE:
8 When starting a cold engine, the engine
needs to be warmed up. Refer to
“Warming Up Engine” for details.
8 If the engine doesn’t start on the first
try, repeat the procedure. If the engine
fails to start after 4 or 5 tries, open the
throttle a small amount (between 1/8
and 1/4) and try again. If the engine still
fails to start, refer to “Troubleshooting”
in Chapter 5.
To Next Page
Loading...
