What to do if Yamaha F50DET F50FEHD Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha F50DET F50FEHD boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
General| Engine Type | 4-Stroke, SOHC |
|---|---|
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Starting System | Electric |
| Lubrication System | Wet Sump |
| Full Throttle Operating Range | 5000 - 6000 rpm |
| Steering | Remote |
| Displacement | 996 cc |
| Max Output | 50 hp |
| Ignition System | TCI |
| Recommended Fuel | Regular Unleaded |
| Trim Method | Power trim and tilt |
| Exhaust | Through Propeller |
| Recommended Engine Oil | Yamalube 4M |
Critical instructions for preventing severe injury or death.
Step-by-step guide for safely removing the outboard motor from its shipping crate.
Procedures for correctly mounting the outboard motor onto the boat transom.
Instructions for installing various gauges onto the boat's instrument panel.
Visual guides for connecting the digital network gauge system components.
Guidelines for selecting the correct battery capacity and type for Yamaha outboards.
To Next Page
