Need help?Do you have a question about the Yamaha F50F and is the answer not in the manual?
General| Displacement | 996 cc |
|---|---|
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Starting System | Electric |
| Ignition System | TCI (Transistor Controlled Ignition) |
| Lubrication System | Wet Sump |
| Gear Shift | F-N-R |
| Full Throttle RPM Range | 5000-6000 RPM |
| Engine Type | 4-Stroke |
| Max Output | 50 hp |
| Weight | 119 kg |
| Recommended Fuel | Unleaded Gasoline |
| Shaft Length | L |
| Steering | Remote |
| Bore x Stroke | 65.0 mm x 75.0 mm (2.56 in. x 2.95 in.) |
| Fuel Tank Capacity | N/A (remote tank) |
Explains manual structure, format, and symbols.
Details safety procedures for preventing accidents and injuries.
Covers applicable models and serial number identification.
Provides key technical data for different models.
Details maintenance data for fuel, bracket, and drive units.
Lists specified torque values for various fasteners.
Lists essential tools for performing checks and adjustments.
Provides a guideline for regular maintenance based on hours or time.
Procedures for checking fuel joints, hoses, and filters.
Checks related to engine oil level and changes.
Lists specialized tools for fuel system diagnostics.
Illustrates routing for fuel and blowby hoses.
Details inspection and disassembly of the fuel filter and pump.
Explains components and assembly of the intake manifold.
Lists specialized tools for power unit maintenance.
Procedures for checking compression and oil pressure.
Details disassembly and checks for cylinder head components.
Covers disassembly and checks for pistons, rings, and crankshaft.
Lists specialized tools for lower unit service.
Procedures for removing, checking, and assembling the lower unit.
Details removal, disassembly, and assembly of drive shaft and lower case.
Guides on selecting and calculating shim thicknesses.
Lists specialized tools for bracket unit maintenance.
Covers checking, assembling, and lubricating the tiller handle.
Procedures for removing, disassembling, and assembling the upper case.
Covers removal and assembly of the power trim and tilt unit.
Lists specialized tools for electrical system diagnostics.
Procedures for measuring peak voltage and resistance.
Covers checking spark, wires, coils, ECM, pulser coil, and sensors.
Checks injectors, electric fuel pump, relays, and solenoid valve.
Lists specialized tools for troubleshooting.
Explains features and functions of the diagnostic system.
Guides on diagnosing electronic control system issues using flash patterns.
Troubleshooting for engine start issues.
To Next Page
