Yamaha F6 - Page 67

Operation
61
2. Close the air vent valve and air vent
screw.
3. Align the fuel cock with the closed posi-
tion.
4. After stopping the engine, disconnect the
fuel hose from the fuel joint on the out-
board motor, and then install the fuel joint
cap. WARNING! When not using a por-
table fuel tank, make sure to install the
fuel joint cap. Otherwise, injury could
result from striking the fuel joint acci-
dentally.
[EWM02411]
1. Engine stop button
1. Engine shut-off switch
2. Cord
3. Clip
1. Air vent valve
ZMU06726
1
ZMU06867
1
3
2
ZMU07627
11
1. Air vent screw
1. Closed position
1
ZMU07444
ZMU06871
1
1
U6BV37E0.book Page 61 Wednesday, May 1, 2013 8:56 AM