Yamaha F6 - Inspecting and Replacing Anode (External)

Maintenance
91
F2.5
F4, F6
6. Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7. Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw.
EMU39332
Inspecting and replacing anode (ex-
ternal)
Yamaha outboard motors are protected from
corrosion by sacrificial anode. Inspect the ex-
ternal anode periodically. Remove scales
from the surface of the anode. Consult a
Yamaha dealer for replacement of the exter-
nal anode.
NOTICE
ECM00720
Do not paint anodes, as this would render
them ineffective.
F2.5
F4, F6
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
ZMU06780
1. Anode
1. Anode
1
ZMU07374
ZMU06781
1
U6BV37E0.book Page 91 Wednesday, May 1, 2013 8:56 AM