Yamaha F6 - Page 72

Operation
66
TIP:
If the outboard motor is not facing forward, the
tilt support lever cannot automatically turn to
the locked position. If the tilt support lever
does not automatically lock, swing the out-
board motor a little to the left and right.
F4, F6
1. Align the fuel cock with the closed posi-
tion.
2. Move the gear shift lever to the neutral
position.
3. To prevent steering movement, turn the
steering friction adjuster clockwise.
4. Close the air vent valve.
5. Disconnect the fuel hose from the fuel
joint on the outboard motor, and then in-
stall the fuel joint cap. WARNING! When
not using a portable fuel tank, make
sure to install the fuel joint cap. Other-
wise, injury could result from striking
the fuel joint accidentally.
[EWM02411]
1. Closed position
1. Neutral position
ZMU06871
1
1
1
ZMU06749
1. Steering friction adjuster
1. Air vent valve
1. Fuel hose
ZMU06827
1
ZMU07627
11
ZMU06753
2
1
U6BV37E0.book Page 66 Wednesday, May 1, 2013 8:56 AM