Yamaha F6 - Changing Engine Oil (F4, F6)

Maintenance
80
Fuel line
Inspection or replace-
ment as necessary
Fuel pump (F4, F6)
Inspection or replace-
ment as necessary
Fuel/engine oil leakage Inspection
Gear oil Replacement
Greasing points Greasing
Impeller/water pump
housing
Inspection or replace-
ment as necessary
Impeller/water pump
housing
Replacement
Propeller/propeller
nut/cotter pin
Inspection or replace-
ment as necessary
Shift link
Inspection, adjustment
or replacement as nec-
essary
Spark plug
Inspection or replace-
ment as necessary
Spark plug cap/spark
plug wire
Inspection or replace-
ment as necessary
Water from the cooling
water pilot hole
Inspection
Throttle link/throttle ca-
ble
Inspection, adjustment
or replacement as nec-
essary
Thermostat
Inspection or replace-
ment as necessary
Valve clearance
Inspection and adjust-
ment
Cooling water inlet Inspection
Stop switch
Inspection or replace-
ment as necessary
Connector connec-
tions/lead connections
Inspection or replace-
ment as necessary
Fuel tank (optional
Yamaha portable fuel
tank) (F4, F6)
Inspection and clean-
ing as necessary
Fuel tank (built-in tank)
Inspection and clean-
ing as necessary
Item Actions
Initial Every
20 hours
(3 months)
100 hours
(1 year)
300 hours
(3 years)
500 hours
(5 years)
U6BV37E0.book Page 80 Wednesday, May 1, 2013 8:56 AM