Yamaha F9.9B - Tilt Lock Mechanism; Tilt Support Lever; Top Cowling Lock Lever

E
2-12
EMU00152
TILT LOCK MECHANISM (for Manual
tilt model)
The tilt-lock mechanism is used to prevent
reverse thrust from the propeller lifting the
outboard motor when reversing.
To lock it, set the tilt-lock lever in the up
position.
To release it, push the tilt-lock lever down.
1 Tilt-lock lever
EMU00158
TILT SUPPORT LEVER
To keep the outboard motor in the tilted-up
position, push the tilt support lever so the
pin locks in the upper slot.
001527
q
001530
001524
q
EMU00162
TOP COWLING LOCK LEVER
To remove the engine top cowling, turn the
lock lever. Then lift off the cowling. When
replacing the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling again by moving the lever upward.
1 Top cowling lock lever
6G8-9-1L-2 3/26/02 11:57 AM Page 13
www.reelschematic.com