E
4-30
EMU01635
CHECKING TOP COWLING
Check the fitting of the top cowling by push-
ing it with both hands.
If the fitting is loose have it repaired by a
Yamaha dealer.
EMU00409
MOTOR EXTERIOR
EMU00410
Cleaning the Outboard Motor
After use, wash the exterior of the outboard
with fresh water.
Flush the cooling system with fresh water.
NOTE:
Refer to Flushing Cooling System instruc-
tions in “TRANSPORTING AND STORING
OUTBOARD MOTOR”.
EMU00412
Checking Painted Surface of Motor
Check the motor for scratches, nicks, or
flaking paint. Areas with damaged paint are
more likely to corrode. If necessary, clean
and paint the areas. A touch-up paint is
available from a Yamaha dealer.
EMU00413
COATING THE BOAT BOTTOM
A clean hull improves boat performance.
The boat bottom should be kept as clean of
marine growths as possible. If necessary,
the boat bottom can be coated with an anti-
fouling paint approved for your area to inhib-
it marine growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
001183
6G8-9-1L-4 3/26/02 11:58 AM Page 31
www.reelschematic.com
To Next Page
