What to do if Yamaha Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha FL200AET Outboard Motor boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
How to setup Yamaha FL200AET Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
What to do if Yamaha FL200AET Outboard Motor software stops operating and an error message appears?
If an error message appears and the program stops operating, follow the instructions provided in the error message.
Failure to follow WARNING instructions could result in severe injury or death.
Step-by-step guide for safely uncrating the outboard motor from a steel frame.
Provides guidance on proper outboard motor mounting for optimal performance and reliability.
Procedure and requirements for installing the remote oil tank for specific engines.
Comprehensive dimension data for various 2-stroke outboard motor models.
Comprehensive dimension data for various 4-stroke outboard motor models.
Dimensional specifications for clamp brackets across different outboard motor models.
Guidance on selecting the appropriate propeller based on engine speed and load.
List of propeller applications for various Yamaha outboard motor models in 2009.
Overview of Yamaha remote control systems and their applications.
Information on tiller handle kits for various Yamaha engines, including US and Japan models.
Specifications and applications for analog tachometer gauges.
Specifications and applications for digital tachometer gauges.
Details on speedometer functions, applications, and dimensions.
Information on fuel management gauge functions, applications, and setup.
Wiring diagram for digital meters on single-engine setups.
Wiring diagram for digital meters with side-mount remote control.
Wiring diagram for digital meters with binnacle remote control.
Wiring diagram for digital meters on twin-engine setups with binnacle RC.
Wiring diagram for analog meters on 2-stroke engines.
Wiring diagram for analog meters on 2- and 4-stroke engines.
Wiring diagrams for single, twin, and triple engine digital network gauge setups.
Procedure for initial setup of digital network gauges for multi-engine installations.
Common troubleshooting steps for digital network gauge system issues.
Guidance on selecting the correct battery capacity and type for Yamaha outboards.
Wiring instructions for single and multi-engine battery setups with isolators.
Requirements for extending battery cables based on capacity, size, and temperature.
Checklist for pre-delivery inspection to ensure customer satisfaction.
Components included in the digital tachometer and speedometer rigging kit.
General| Prop Shaft Horsepower | 200 hp |
|---|---|
| Full Throttle RPM Range | 5000 - 6000 rpm |
| Compression Ratio | 10.3:1 |
| Exhaust | Through Propeller |
| Lubrication System | Wet Sump |
| Starting System | Electric |
| Bore x Stroke | 96.0 x 96.2 mm |
| Fuel Induction System | EFI |
| Ignition / Advance System | TCI |
| Gear Ratio | 1.86:1 |
| Weight | 227 kg |
| Cooling System | Water Cooled |
| Displacement | 2785cc (169.9 ci) |
To Next Page
