What to do if my Yamaha FL250GET gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or replace the gauge itself.
Why is the illumination not lighting on my Yamaha FL250GET Outboard Motor gauge?
If the illumination isn't lighting, it could be because of a power issue or a damaged gauge. You should try replacing the fuse, ensuring the couplers are securely connected, replacing any damaged wires or hubs, or replacing the gauge.
Why does my Yamaha Outboard Motor fuel management gauge show incorrect fuel consumption?
If the fuel management gauge shows incorrect fuel consumption, the engine recognition may be wrong. To resolve this, default the engine number. Then, turn the key switch on in order from the portside engine to re-memorize each engine number.
How to fix a Yamaha Outboard Motor tachometer that shows incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong. Push the SET button for 10 seconds to default the engine number, and then memorize each engine number again.
What to do if my Yamaha Outboard Motor speedometer shows the incorrect fuel level?
If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
What does it mean when my Yamaha FL250GET gauge shows “----”?
If the gauge shows “----”, it indicates that the digital signal is not being received. Make sure the couplers are securely connected and replace any damaged bus wires or hubs.
Why does my Yamaha FL250GET Outboard Motor fuel management gauge show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting is probably wrong. Fill the tank with fuel, and then set the correct fuel tank capacity.
Why does my Yamaha Outboard Motor trim gauge show the incorrect position?
If the trim gauge shows an incorrect position, the initial position setting might be wrong, or the trim sensor could be damaged. Put the motor in the fully trimmed-in position and reset the initial (zero) trim angle. If that doesn't work, replace the trim sensor.
Why is my Yamaha FL250GET Outboard Motor gauge operating unstably?
If the gauge operates unstably, it's likely that the resistor isn't connected to the ending hubs. Connect the gray 6-pin cap to the ending multi-hubs to resolve this.
Why is the Yamaha FL250GET Outboard Motor gauge response poor?
If the gauge response is poor, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Replace the faulty unit or remove the heavy signal output unit.
Step-by-step instructions for safely uncrating the outboard motor from its steel frame.
Instructions for correctly positioning and mounting the outboard motor on the boat transom.
Guideline for setting motor height to prevent water ingress and ensure performance.
Defines symbols and provides detailed measurements for various outboard motor models.
Details on Yamaha propeller series like Standard, Reliance, Saltwater, and their features.
Table of engine RPM ranges for various models to select the appropriate propeller.
Overview of different Yamaha remote control types (Push/Pull) and their applications.
Description of the multi-function tiller handle and its electrical functions.
Wiring diagram for multi-function tiller handles for EU & ANZ models after Jan. 2012.
Procedures for mounting various gauges to the panel, including clearance and angle.
Information on fuel management gauge types, applications, dimensions, and wiring.
Representative wiring diagrams for remote controls and instruments.
Details the immobilizer unit and its acceptable models.
Wiring diagrams for various engine and station configurations with 6Y9 gauges.
Recommended battery specifications (CCA, MCA, RC, etc.) for 4-stroke and 2-stroke engines.
Wiring examples for single and twin engine applications with isolator.
Checklist for pre-delivery inspection of the outboard motor, covering static and dynamic checks.
General| Brand | Yamaha |
|---|---|
| Model | FL250GET |
| Category | Outboard Motor |
| Language | English |
To Next Page
