What to do if Yamaha Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha FT60DET boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
How to setup Yamaha Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
Step-by-step guide for safely removing the outboard motor from its crate.
Detailed instructions for correctly mounting the outboard motor onto the transom.
Details the characteristics and types of Yamaha propellers for optimal engine performance.
Guidance on choosing the appropriate propeller based on boat load and operating conditions.
Provides recommended engine RPM ranges for Wide-Open-Throttle operation with different propellers.
Introduces the multi-function tiller handle and its electrical functions for various engines.
Step-by-step guide for installing various gauges onto a panel for proper operation.
Covers functions like fuel flow, consumption, and economy for efficient operation.
Provides representative wiring diagrams for remote controls and instruments for common configurations.
Provides solutions for common issues encountered with digital network gauges and systems.
Provides guidance on selecting the correct battery capacity and type for Yamaha outboard motors.
Details wiring procedures for single, twin, and isolator-equipped battery systems.
General| Maximum Output | 60 hp |
|---|---|
| Starting System | Electric |
| Full Throttle Operating Range | 5000-6000 rpm |
| Steering | Remote |
| Engine Type | 4-Stroke |
| Displacement | 996 cc |
| Fuel System | Electronic Fuel Injection |
| Bore x Stroke | 65 x 75 mm |
| Shaft Length | 20 in |
| Trim System | Power Trim & Tilt |
To Next Page
