4-18
E
EJU22440
Lubrication points
To keep moving parts sliding or rotating
smoothly, coat them with water-resistant
grease.
Recommended water-resistant grease:
Yamaha Marine Grease/
Yamaha Grease A
●
Throttle cable (throttle body end)
●
Throttle cable (handlebar end)
Loosen the adjuster 1 and disconnect
the outer cable from the bracket. Spray a
rust inhibitor into the outer cable.
Connect the outer cable, and then adjust
the throttle cable free play. (See page
4-15 for adjustment procedures.)
●
Steering cable (handlebar end)
E_F1X-10.book Page 18 Friday, August 26, 2005 11:30 AM
To Next Page
Loading...
