Yamaha FX High Output WaveRunner 2006 - Multifunction Meter

2-22
E
EJU22240
Multifunction meter
The multifunction meter is equipped with
the following three main components for
help and convenience in operating the
watercraft.
1
Analog speedometer/tachometer and indicator
lights
2
Left multifunction display and operation but-
tons
3
Right multifunction display and operation but-
tons (for FX Cruiser High Output)
CAUTION:
@
Do not run the engine for more than
15 seconds when checking the operation
of the meter on land. The engine could
overheat.
@
N
O
TE:
@
●
When the multifunction meter starts oper-
ating, the analog speedometer/tachome-
ter makes one sweep, all displays light up
for 2 seconds, and then the meter starts
to operate normally.
●
The multifunction meter will continue to
operate for 25 seconds after the engine
stops.
@
E_F1X-10.book Page 22 Friday, August 5, 2005 10:34 AM