2-10
E
EJU10160
Engine shut-off switch
Insert the clip 1, on the end of the engine
shut-off cord 2, under the engine shut-off
switch 3 (black button). The engine will stop
automatically when the clip is removed from
the switch, such as if the operator falls off
the watercraft.
WARNING
@
●
Always attach the engine shut-off cord
to your wrist and the clip to the engine
shut-off switch BEFORE starting the
engine.
●
To prevent accidental starting of the
engine or unauthorized use by chil-
dren or others, always remove the clip
from the shut-off switch when the
engine is not running.
@
EJU21160
Start switch
Push the start switch 1 (green button) to
start the engine.
N
TE:
@
The engine will not start when the lock mode
of the Yamaha Security System has been
selected or the clip is removed from the
engine shut-off switch. (See page 2-19 for
Yamaha Security System and low-RPM
mode selection procedures.)
@
E_F1X-10.book Page 10 Friday, August 5, 2005 10:34 AM
To Next Page
Loading...
