2-2
E
1
Fuel tank filler cap
2
Intake grate
Prevents debris from getting into the jet pump.
3
Speed sensor
4
Stern eye
Use to attach rope for transporting or mooring.
5
Stern drain plugs
Use to drain water in the bilge when the water-
craft is on dry land.
6
Reverse gate
Controls direction of jet thrust when in reverse.
7
Ride plate
8
Jet thrust nozzle
Changes the direction of jet thrust according
to handlebar position.
9
Reboarding step (for FX Cruiser High Out-
put)
Use to board the watercraft in water.
0
Electric bilge pilot outlet
A
Cleat
Use to attach a towrope for pulling water-skier,
or a rope for mooring the watercraft.
B
Handgrip
Use for support when boarding the watercraft
or when seated facing rearward and acting as
a spotter for a water-skier.
E_F1X-10.book Page 2 Friday, August 5, 2005 10:34 AM
To Next Page
Loading...
