Do you have a question about the Yamaha KX-W392 and is the answer not in the manual?
Number of Decks | 2 |
---|---|
Track System | 4-track, 2-channel stereo |
Tape Speed | 4.76 cm/s |
Motor | DC Servo Motor |
Total Harmonic Distortion | 1.0% |
Auto Reverse | Yes |
Power Supply | AC 120V, 60Hz |
Type | Dual Cassette Deck |
Heads | 1 x record/playback, 1 x playback, 1 x erase |
Wow and Flutter | 0.08% |
Wow and Flutter (WRMS) | 0.08% |
Dolby Noise Reduction | Dolby B, C |
Inputs | Line |
Outputs | Line |
Output (line) | 0.5V (line) |
Step-by-step guide to playing a cassette tape on the deck.
How to set the Dolby Noise Reduction selector for playback.
How to set the auto reverse function for tape playback.
Step-by-step guide for recording audio from a source.
How to use the DSS function during recording.
How to set Dolby NR for recording.
How to set auto reverse mode for recording.
How to adjust recording levels using meters and controls.
Adjusting PLAY TRIM before dubbing for optimal sound.
Explains different types of cassette tape formulations.
How the deck automatically detects tape types.
How to use write-protection tabs on cassette tapes.
Method to remove slack from tape before loading.
Guidelines for storing cassette tapes properly.
Importance and method of cleaning heads, capstans, and rollers.
When and how to demagnetize the tape heads.
Information on using the optional remote control.