Need help?Do you have a question about the Yamaha Libero 65 and is the answer not in the manual?
General| Displacement | 106 cc |
|---|---|
| Transmission | 4-speed constant mesh |
| Brakes (Front) | Drum |
| Brakes (Rear) | Drum |
| Compression Ratio | 9.0:1 |
| Fuel System | Carburetor |
| Ignition | CDI |
| Starting System | Kick start |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
Guidance on defensive riding, hazard reaction, and understanding motorcycle capabilities and limitations.
Instructions on effective braking techniques using engine brake and simultaneous front/rear brakes.
Explanation of the main switch operation for ignition and lighting, and steering lock mechanism.
Description of the functions of pass switch, dimmer switch, lights switch, turn signal switch, and horn switch.
Guide on the operation of the clutch lever for engaging and disengaging the clutch smoothly.
Explanation of the fuel cock's function and its three positions: ON, OFF, and RESERVE.
Instructions on using the starter lever for starting a cold engine and its operation.
Guide on how to use the kick-starter to start the engine, including proper technique.
A comprehensive list of checks to perform before riding the motorcycle, including item and page references.
Step-by-step guide to starting and warming up the motorcycle engine when it is cold.
Instructions for starting the motorcycle engine when it is already warm.
Guidance on controlling power through gears, using the shift pedal, and proper shifting techniques.
Important procedures and precautions for the initial 1,000 km break-in period of the motorcycle.
A detailed schedule outlining maintenance tasks and their recommended intervals in days/kms.
Steps for checking the engine oil level using the dipstick and ensuring it's within the correct range.
Procedure for draining old engine oil and refilling with new oil, including torque specifications.
Guidelines for tyre maintenance, including air pressure checks and replacement advice.
Details on tyre inspection, pressure adjustment, safe loading practices, and weight distribution.
Procedure for checking the drive chain slack at its tightest position and recommended adjustment.
Detailed steps for adjusting drive chain slack and maintaining axle alignment using chain pullers.
Procedure for removing the front wheel, including loosening brake cable and speedometer cable.
Steps for installing the front wheel, emphasizing brake shoe plate alignment and axle nut torque.
Procedure for removing the rear wheel, including axle nut, brake rod, and tension bar.
Steps for installing the rear wheel, including axle nut torque and cotter pin replacement.
Guide to diagnosing and resolving common motorcycle problems, recommending dealer service for complex issues.
Recommended practices for motorcycle maintenance, operation, and adherence to scheduled services.
List of items to check during scheduled services, including spark plug, carburetor, and air filter.
Prohibited actions and practices to avoid, such as overloading, unauthorized modifications, or using non-genuine parts.
To Next Page
