Yamaha Loopfactory DX200 - Troubleshooting and Workarounds; Resolving Common Operational Issues

33
DX200
■ ERROR MESSAGES
Display indication Message Comment
This appears when the voltage of the internal backup battery becomes
low. Have the battery replaced by your local Yamaha dealer or any
Yamaha-authorized service personnel.
This appears when too much MIDI data has been received at one time,
causing the unit to stop processing data.
This appears when the received MIDI data is incorrect or contains
errors.
This appears when checksum of the received System Exclusive data
is incorrect.
Err1Err1
Err1Err1
Err1 (flashes)
Err2Err2
Err2Err2
Err2 (flashes)
Err3Err3
Err3Err3
Err3
(flashes)
Err4Err4
Err4Err4
Err4 (flashes)
Battery Low
MIDI Buffer Full
MIDI Data Error
MIDI Checksum
Error