5-6
6) Press the T-handle down firmly to
lock the cap in place. Pull up force-
fully on the handle to be sure it is
locked. If a strong pull will move the
handle, it is not locked securely –
the cap could be forced out by water
pressure during operation.
● Be sure the caps are locked
securely in place. Otherwise the
cap could be forced out of the
access ports by water pressure,
causing loss of performance and
possible damage.
● The hatch cover has interlocks to
shut off the engines should the
hatch be accidentally opened
during operation. The engines
will not restart unless the hatch
is closed and latched.
To Next Page
Loading...
Need help?
General