Yamaha LX2000 User Manual

4-6
PERIODIC INSPECTION CHART
Frequency of maintenance operations may be adjusted according to the operating conditions, but the
following table gives general guidelines.
● Indicates the checkups which you may do yourself.
■ Indicates work to be done by your Yamaha dealer.
Maintenance interval Initial Thereafter Page
Every
10 50 100 100 200
hours hours hours hours hours
36 612
months months months months
Spark plug
Inspection/Cleaning/
●●●●
4-7
Adjustment
Grease points Greasing
●● 4-8
Bearing housing Greasing
■ *1 ● *2 ● *2 4-9
Starter motor idle gear Greasing
■ *3 ● *4 ● *4 4-10
Fuel system Inspection
■■ 4-11
Fuel filter Checking/Replacement
■■ 4-12
Fuel tank Cleaning
■ 4-12
Oil injection system Inspection/Cleaning
■■ 4-12
Carburetor adjustment Inspection/Adjustment
■■■ 4-13
Trolling speed (idle) Adjustment
●● 4-13
Carburetor throttle shaft Inspection
■■
●
(after
Cooling-water passages Cleaning/Flushing every 4-2
use)
Bilge strainer Cleaning
●● ●
Impeller Inspection ■■ ■
Steering cable Inspection ● 4-14
Throttle cable and choke cable Inspection/Adjustment
●● 4-14
Reverse gate mechanism Inspection
●● 4-15
Drain plugs Inspection/Replacement
●
●
(inspect
Battery Inspection fluid level 4-16
before every
launch)
Rubber coupling Inspection
■
Bolts and nuts Retightening ■■■
*1 Grease capacity: 33.0 ~ 35.0 cc (1.11 ~ 1.18 oz.)
*2 Grease capacity: 6.0 ~ 8.0 cc (0.20 ~ 0.27 oz.)
*3 Grease capacity: 8.0 cc (0.27 oz.)
*4 Grease capacity : 2.0 cc (0.07 oz.)
4
MAINTENANCE & CARE

Yamaha LX2000 Specifications

General

Brand	Yamaha
Model	LX2000
Category	Boat
Language	English