Yamaha LX2000 User Manual

2-11
If water is not circulating, something
may be clogging the jet intake grate.
Refer to the Jet Pump Clean-Out pro-
cedures on page 5-5 for further infor-
mation.
If the cause of overheating cannot
be found and corrected, take special
precautions to avoid major engine
damage while you return to shore.
SINGLE ENGINE OVERHEATING —
Shut off the overheating engine and
use the properly running engine to
return to shore. Operate at “no-
wake” speed to prevent water from
flooding the non-operating engine
through the cooling water intake.
BOTH ENGINES OVERHEATING —
If getting a tow from another vessel
is not possible, operate both
engines just slightly above idle
while you return to shore. If you can
be towed, refer to “Towing the Sport
Boat” on page 5-3.
SWITCHES
1 Blower
2 Bilge Pump
3 CD Player
Blower
Press this switch to turn on the blower
to ventilate the engine compartment.
See 3-9 for more information.
Bilge Pump
Press this switch to activate the bilge
pump. See page 3-8.
CD Player
This is the master control for the CD
player. Press this switch to allow CD
player operation.
FEATURES & FUNCTIONS 2
CAUTION:
1
2
3

Yamaha LX2000 Specifications

General

Brand	Yamaha
Model	LX2000
Category	Boat
Language	English