4-8
GREASE POINTS
To keep moving parts sliding or rotating
smoothly, coat them with water resis-
tant grease such as Yamaha Marine
Grease, Yamaha Grease A, or an equiv-
alent.
Throttle Cable and Choke Cable
Grease the throttle-cable and choke-
cable inner wires at the carburetors.
Steering Cable Ball Joints and Inner
Wire
Grease the steering cable and shift
cables ball joints at the steering noz-
zles. Extend the steering cable and
shift cable inner wires and apply a thin
coat of grease to them.
Pivot Points
Grease all pivot points of the steering
and shift mechanism at the pump end.
4 M
AINTENANCE
& CARE
To Next Page
Loading...
Need help?
General