Need help?Do you have a question about the Yamaha M508 and is the answer not in the manual?
Controls the channel output level to the left and right program mixing busses.
Adjusts input sensitivity to accommodate nominal input levels and indicates signal clipping.
Controls frequency response with up to 15 dB boost/cut at 100Hz, 2kHz, and 10kHz.
Assigns the channel fader output to the stereo program mix busses (left/right).
Controls the overall level of the Echo mix bus prior to the Echo output.
Provides 40V/48V to channel inputs for condenser microphone power.
Balanced XLR inputs for channels 1-12.
3-prong NEMA connector for the detachable AC power cord.
Guidelines for connecting to AC power mains in the US/Canada.
General warning about installation, codes, and liability.
To Next Page
General
