To Next PageTo Next Page
Need help?Do you have a question about the Yamaha RM804 and is the answer not in the manual?
Details frequency response, distortion, hum, noise, gain, and equalization.
Lists input/output impedance, sensitivity, levels, and connector types.
Explains fader, pan, EQ, and mix controls for each input channel.
Covers stereo mix, pan, and post/tape switching for signal path selection.
Describes gain control for input sensitivity matching and peak indicators.
Explains input selector, pan, and PGM assignment switches.
Controls master levels for program busses and echo send.
Manages stereo buss output and echo return signal levels.
Controls monitor output level and source selection for headphones.
Details rear panel connectors for inputs like MIC/LINE, TAPE, and outputs like PGM, ST, ECHO.
Illustrates signal flow and shows signal levels through mixer paths.
Provides the external measurements of the mixer unit.
General
