Yamaha RM804 - Master and Metering Section; Program and Echo Master Controls; Stereo and Echo Return Controls

MASTER & METER SECTION
® PGM 1 — 4 MASTER LEVEL CONTROLS
Adjust the overall level of each individual program buss
after the channel balance has been set up using the
input channel faders @ . Each program buss is output
the respective РОМ OUT 1 ~ 4 terminal. "Drawing
;indicates nominal level control setting. '
(p ECHO SEND CONTROL
Adjust the overall level of the signal output at the
ECHO OUT terminal after the echo mix has been set
up using the channel ECHO mix controls.
[- МІХ BUSSES —
PGM STEREO ECHO S
23 4 LR
MASTER
E
*
o o
г T:
- a -
Ө "n
á UT А TIT
PGM 2
р MASTER
о
o
Y
t E4
[I^]
a
* о -
5 È: > и 1
a
8 ret
- t c |
A o 9
ECHO SEND : i PGM 4 “м
a ч
—u— — 4 —
Y
eO
С ез С) =
o
|
|.
Т
1
|
V
4
© [m stereo [E stereo
SENG
a e
=
№
ZTAK IN
{> Се 1 cuo SEND
DC с-лсавт
5
£e ©
e
ECHO RETURN. L
т
e
= [А]
Ф ECHO RETURN L, В CONTROLS
The ECHO RETURN L control determines the level at
which a source signal input at the ECHO RETURN L
jack is mixed into the РОМ 1 and 3 busses, and into
the STEREO L buss. Similarly, the ECHO RETURN В
control determines the level at which a source input at
the ECHO RETURN R jack is mixed into the PGM 2
and 4 busses, and into the STEREO R buss. If a source
is plugged into the ECHO RETURN L jack only, this
signal is treated as a mono source which can be mixed
into both the РСМ 1, 3/STEREO L апа PGM 2,
4/STEREO R busses using the respective ECHO
18, RETURN controls.
STEREO
|
|
®
ECHO
RETURN
ASSIGN
SWITCHES
Determine
which
busses
are
actually
assigned
(con-
nected) to the ECHO RETURN L and R control
® STEREO MASTER FADER outputs,
Determines the overall level of the signal on the stereo | Г МІХ BUSSES 7]
buss after the stereo mix has initially been set up using (93 а LR ЕО
the
channel
STEREO
mix
controls.
|
o
The stereo buss signals are output at the STEREO L, R J],
terminals. Rated output is achieved with the fader at ECHO d ECHO RETURN R
its “0” setting. | ща за
ЕСНО He L