Yamaha MC1608M - Page 7

-
Q Master CUE switch
MASTER SUB IN !
MUSTER SUB IN 8
Pressing the master CUE switch permits headphone monitoring of a single master output
(including any signal received at a master insert). If more than one master CUE switch at a time
is pressed, al! the corresponding signals may be monitored. This switch will operate whether the
master ON switch is on or off. !
An indispensable feature which allows the engineer to hear the same monitor mix as any of the
performers, and make necessary adjustments.
NOTE: The master CUE signal will be muted if any input or AUX input CUE switch 15
| depressed.
Master ON switch
The master ON button allows instant cancelling of the master output, pre-fader, without
affecting any settings. It is ON in the DOWN position.
A useful feature for cancelling a performer’s mix if he is not required to play in one song,
especially if it is a quiet passage where the onstage sound could affect the sound reaching the
auditorium,
Master fader
Signals from the channel inputs, auxiliary inputs, and submaster inputs are routed via the
master mix busses to a 100 mm smooth linear master fader. Position “6” on the fader scale
(marked with bold arrows) gives nominal output level, which can of course be checked on the
VU meters.
The eight faders also provide a good visual indication of the overall mix levels.
MASTER | INSERT
IN/OUT (-10dB)
MASTER | MASTER 2 MASTER 3
MASTER 5 MASTER 6 MASTER 7 MASTER 8
АЛ! AUX 2
INPUT CUE
CUE CONTROL MASTER CUE
MASTER |
MASTER 4
^
MASTER LON
у
MASTER | FADER
MASTER OUT |
CH INPUT o (4448)
IN/OUT (-104В)
MASTER 8
d
MASTER B ОН
>{
AUX IN.
MASTER OUT 8
(4448)
i
|
||| MASTER 8 INSERT
Ө.
E
г d у || ү БЕЙ ШЕБІ
MASTER 8 FADER