Supplementary infomation
194
Voice mode
Performance
mode
Song mode Utility mode File mode Master mode
Pattern mode
Mixing Voice
mode
Reference
Owner’s Manual
• Example 2 (Using the Tie function)
1 Set the parameters as illustrated below.
Since the first note is a half note, set the StepTime to the half-
note icon (a value of 960), and set the GateTime to 80%, since
you don't want the notes to play in legato.
2 Enter the first note F.
3 Enter the next 8th notes.
Keep the display settings unchanged for the remaining notes
in the measure, and press/release each key one by one as
shown below.
4 Follow the instructions below to enter the next dotted
half note.
5 Enter the last quarter note by pressing and releasing F.
6 Move the pointer to the top (beginning) of the song and
press the [F] (Play) button to hear the note data you
just recorded in steps 1 – 5.
1 Press and release F.
2 Change this to an eighth
note (240).
3 Press the [F4] button to tie the two F notes (half note and
8th note).
1 Change this to a
quarter note (480).
2 Press and release A.
3 Press the [F4] button twice to expand the quarter note
to a dotted half note.
LOCATE
REC
12
SEQ TRANSPORT
To Next Page
Loading...
