25
n For Plug-in voices, you will see the following panel. Click [DETAIL] to open the “Plug-in Voice Detail” dia-
log.
1 VOICE BANK ..................Determines the Plug-in voice bank.
2 VOICE NUMBER.............Determines the Plug-in voice number.
3 LFO .................................Determines the Speed of LFO, Pitch Modulation, and Delay.
4 NOTE SHIFT ...................Determines the amount of Note Shift (key transpose).
Click [NATIVE PARAM] to open the “NATIVE Parameter” dialog. Select the Plug-in board to be edited
at the top left of the keyboard illustration on the window.
2 ON/OFF switches
Click these to switch each Element on or off.
3 Element Level knobs
Use these to set the level of each Element.
4 EF (Effect) A / EF (Effect) B / THRU switches
Click these to assign each Element to Insertion Effect A or Insertion Effect B, or to bypass the
Insertion Effect units.
1
2
3
4
To Next Page
Loading...
