To Next PageTo Next Page
Need help?Do you have a question about the Yamaha MX-1 and is the answer not in the manual?
Minimum RMS Output Power per Channel| 8 ohms, 20 Hz to 20 kHz, 0.008% THD | 200W+200W |
|---|---|
| 4 ohms, 20 Hz to 20 kHz, 0.03% THD | 260W+260W |
| 2 ohms, 20 Hz to 20 kHz, 0.09% THD | 320W+320W |
Dynamic Power per Channel| 8 ohms | 280W |
|---|---|
| 4 ohms | 460W |
| 2 ohms | 630W |
Power Supply and Consumption| Power Supply [U.S.A. and Canada models] | AC 120V, 60 Hz |
|---|---|
| Power Supply [Australia and U.K. models] | AC 240V, 50 Hz |
| Power Consumption [U.S.A. and Canada models] | 560 VA, 420W |
Dimensions and Weight| Dimensions (W x H x D) | 486 x 116 x 438 mm |
|---|---|
| Dimensions (W x H x D in inches) | 19-1/8” x 4-9/16” x 17-1/14” |
| Weight | 24.0 kg (52 lbs. 13 oz.) |
Minimum RMS Output Power per Channel| 8 ohms, 20 Hz to 20 kHz, 0.008% THD | 150W+150W |
|---|---|
| 4 ohms, 20 Hz to 20 kHz, 0.03% THD | 190W+190W |
| 2 ohms, 20 Hz to 20 kHz, 0.09% THD | 230W+230W |
Dynamic Power per Channel| 8 ohms | 190W |
|---|---|
| 4 ohms | 310W |
| 2 ohms | 410W |
Power Supply and Consumption| Power Supply [Europe model] | AC 230V, 50 Hz |
|---|---|
| Power Supply [General model] | AC 110/120/220/240V, 50/60 Hz |
| Power Consumption [Australia, U.K., Europe and General models] | 360W |
Dimensions and Weight| Dimensions (W x H x D) | 486 x 116 x 438 mm |
|---|---|
| Dimensions (W x H x D in inches) | 19-1/8” x 4-9/16” x 17-1/14” |
| Weight | 19.5 kg (42 lbs. 14 oz.) |
Explains symbols used in the manual to alert users to potential hazards.
Provides comprehensive safety guidelines for unit operation, installation, and environmental considerations.
Details key performance metrics including output power, THD, and frequency response for MX-1 and MX-2.
Highlights speaker drive capability, remote control integration, and input terminal quality.
Illustrates the specific wiring and component connections for the MX-1 model.
Illustrates the specific wiring and component connections for the MX-2 model.
Detailed guide on how to properly connect speaker wires to terminals, ensuring correct polarity.
Instructions for linking the power amplifier to a compatible pre-amplifier for integrated control.
Details on the power switch and indicator located on the front panel of the unit.
Explains speaker selection switches and input level adjustments found on the rear panel.
Lists common problems, their causes, and recommended remedies for the unit.
Details on RMS output power, impedance, THD, frequency response, and input sensitivity.
Information on power supply, consumption, dimensions, weight, and damping factor.
