To Next PageTo Next Page
Need help?Do you have a question about the Yamaha MX-630 and is the answer not in the manual?
General| Power output | 130W per channel into 8Ω (both channels driven, 20Hz-20kHz, 0.03% THD) |
|---|---|
| Frequency response | 10Hz-100kHz (+0dB, -3dB) |
| Total harmonic distortion | 0.03% (20Hz-20kHz, half power) |
| Damping factor | 200 (8Ω, 1kHz) |
| Input sensitivity | 1.23V (for rated output) |
| Dimensions | 435 x 137 x 398mm |
| Weight | 10.3kg |
| Type | Stereo |
Warns against removing the cover to prevent electric shock and directs servicing to qualified personnel.
Details the meaning of safety symbols like lightning flash and exclamation mark used in the manual.
Provides 14 numbered instructions for safe operation, placement, and handling of the appliance.
Details conditions requiring professional service and user limitations for maintenance.
Covers warnings related to installation, power lines, grounding, and speaker connections.
Describes the power switch, speaker selection, clipping indicators, and level controls on the front.
Explains the input terminals, ground terminal, speaker terminals, and unswitched AC outlet.
Details how to connect the control amplifier's output to the unit's input jacks.
Explains how to connect up to three pairs of speakers, including impedance considerations.
Provides instructions on stripping wires, polarity, cord length, and using connectors.
Lists minimum RMS output power, dynamic power, and DIN standard output power by impedance.
Details power consumption, dimensions, weight, input sensitivity, frequency response, and distortion.
Lists common issues like no sound or hum, with probable causes and corrective actions.
