Need help?Do you have a question about the Yamaha MX-1000/U and is the answer not in the manual?
General| Type | Stereo Power Amplifier |
|---|---|
| Damping factor | 250 (8Ω, 20Hz-20kHz) |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.003% (8 Ohms) |
| Signal-to-Noise Ratio | 125dB (A-weighted) |
| Input Sensitivity | 1.55V |
| Weight | 70.5 pounds |
| Signal to Noise Ratio | 125dB (A-weighted) |
| Dimensions | 482 x 195 x 490mm (W x H x D) |
Verify proper insulation of exposed surfaces after service.
Details RMS and dynamic output power per channel for various impedances.
Covers frequency response, THD, and intermodulation distortion.
How to adjust the idling current for stable operation.
Procedure to calibrate the meter display level accurately.
The primary schematic diagram of the amplifier's circuitry.
Comprehensive list of electrical components with part numbers.
To Next Page
