Yamaha NMX GPD125-A - Page 44

Periodic maintenance and adjustment
6-4
6
11 * Steering bearings
• Check bearing play and steering
for roughness.
√√√√√
• Lubricate with lithium-soap-
based grease.
Every 24000 km (14000 mi)
12 * Chassis fasteners
• Make sure that all nuts, bolts and
screws are properly tightened.
√√√√√
13
Front brake lever
pivot shaft
• Lubricate with silicone grease. √√√√√
14
Rear brake lever
pivot shaft
• Lubricate with silicone grease. √√√√√
15
Sidestand, center-
stand
• Check operation.
• Lubricate with lithium-soap-
based grease.
√√√√√
16 * Sidestand switch • Check operation. √√√√√√
17 * Front fork
• Check operation and for oil leak-
age.
√√√√
18 *
Shock absorber as-
semblies
• Check operation and shock ab-
sorbers for oil leakage.
√√√√
19 Engine oil
• Change. (See page 6-10.) √
When the oil change indicator light flashes (5000 km (3000 mi) af-
ter the initial 1000 km [600 mi] and every 6000 km (3500 mi)
thereafter)
• Check oil level and vehicle for oil
leakage.
Every 6000 km (3500 mi) √
20 * Engine oil strainer • Clean. √
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING
ANNUAL
CHECK
1000 km
(600 mi)
6000 km
(3500 m
i)
12000 km
(7000 mi)
18000 km
(10500 mi)
24000 km
(14000 mi)
U2DSE0E0.book Page 4 Thursday, March 19, 2015 10:34 AM