What to do if the Yamaha Synthesizer P-60 overall volume is low, or no sound is heard?
If the overall volume is low or no sound is heard from your Yamaha Synthesizer P-60, check the following: * Adjust the volume to an appropriate level using the [MASTER VOLUME] control. * Ensure headphones are not connected to the headphones jack. * Confirm that Local Control is turned ON.
Why is there noise from the Yamaha P-60 speakers or headphones?
The noise you hear from the speakers or headphones of your Yamaha Synthesizer may be due to interference from a mobile phone used nearby. To resolve this, turn off the mobile phone or move it further away from the P-60.
What to do if the Yamaha P-60 foot switch has no effect?
If the foot switch of your Yamaha Synthesizer has no effect, or the sound sustains continuously, the pedal cord may not be properly connected. Ensure the pedal cord is securely inserted into the [SUSTAIN PEDAL] jack.
What to do if the Yamaha P-60 Synthesizer foot switch seems to produce the opposite effect?
If pressing the foot switch cuts off the sound and releasing it sustains the sounds on your Yamaha Synthesizer, the polarity of the foot switch is reversed. Make sure that the foot switch plug is properly connected to the [SUSTAIN PEDAL] jack before turning on the power. Do not press the pedal while turning the power on.
How to turn on Yamaha Synthesizer P-60?
To turn on the Yamaha Synthesizer P-60, insert the adaptor plug into an AC outlet and the adaptor socket into the unit securely.
Why is there a click or pop sound when turning on/off Yamaha Synthesizer?
A click or pop sound when turning the Yamaha Synthesizer on or off is normal. This occurs when electrical current is being applied to the instrument.
Critical safety warnings regarding electrical power, water exposure, and fire risks.
Cautions against disassembling the unit or if malfunctions occur.
Safety guidelines for instrument placement, connection, and use to prevent injury or damage.
Step-by-step guide for connecting the power adapter and turning the unit on/off.
Instructions on using the master volume control to set the desired sound level.
Information on connecting the P-60 to other devices and computers.
Provides solutions for common problems and lists optional accessories.
Details on connecting the P-60 to a computer via MIDI or USB interfaces.
Guides for setting MIDI channels and managing local control.
Explains the data formats for key MIDI messages.
Details program change and system message formats.
Explains various types of system exclusive MIDI messages.
Presents tables detailing MIDI parameter changes for different functions.
General| Type | Digital Piano |
|---|---|
| Polyphony | 32 |
| Sound Engine | AWM (Advanced Wave Memory) |
| Effects | Reverb, Chorus |
| Connectivity | MIDI (In/Out), Sustain Pedal |
| Speakers | 12cm x 2 |
To Next Page
