How to adjust keyboard volume relative to Song/Style playback on Yamaha PSR-S950 Musical Instrument?
If the keyboard volume is lower than the Song/Style playback volume on your Yamaha Musical Instrument, raise the volume in the BALANCE display.
What to do if an existing file is not shown on Yamaha PSR-S950?
If an existing file is not shown on your Yamaha Musical Instrument: * The file extension (.MID, etc.) may have been changed or deleted. Manually rename the file, adding the appropriate extension, on a computer. * Data files with names of more than 50 characters cannot be handled by the instrument. Rename the file, reducing the number of characters to 50 or less.
Why don't all notes sound when played simultaneously on my Yamaha PSR-S950 Musical Instrument?
If not all simultaneously played notes sound on your Yamaha Musical Instrument, it's likely that you are exceeding the maximum polyphony of the instrument.
Why won't the main display appear on my Yamaha Musical Instrument?
If the Main display on your Yamaha Musical Instrument doesn't appear when you turn on the power, it might be due to a USB flash memory device being installed. To resolve this, turn off the power, disconnect the USB device, and then turn the power back on.
What to do if I hear noise from my Yamaha Musical Instrument speakers?
If you're hearing noise from the speakers of your Yamaha Musical Instrument, try turning off any nearby mobile phones or moving them further away from the instrument. This should help reduce interference.
Why does my Yamaha PSR-S950 sound distorted or noisy?
If the sound from your Yamaha Musical Instrument is distorted or noisy: * Ensure that all relevant volume settings are at appropriate levels. The volume may be turned up too high. * Also, review the effect or filter settings, and adjust them as needed.
How to fix low or no sound on my Yamaha Musical Instrument?
If the overall volume of your Yamaha Musical Instrument is too low or you're not hearing any sound, there are several things to check: * Ensure the master volume isn't set too low by adjusting it with the [MASTER VOLUME] dial. * Make sure the PART ON/OFF [RIGHT 1]/ [RIGHT 2]/[LEFT] button is activated. * Increase the volume in the BALANCE display. * Verify the desired channel is set to ON. * Unplug any connected headphones. * Deactivate the [FADE IN/OUT] function by pressing the button.
General| Polyphony | 128 |
|---|---|
| Styles | 408 |
| One Touch Setting (OTS) | 4 for each Style |
| Amplifiers | 15 W x 2 |
| Featured Voices | Super Articulation Voices, Mega Voices |
| Featured Styles | MegaVoices, Session Styles |
| Recording Format | WAV |
| Internal Memory | 6.7 MB |
| Effects | Reverb, Chorus, DSP, Master EQ |
| Speakers | 13 cm + 5 cm (dome) x 2 |
| Connectivity | USB TO DEVICE, USB TO HOST, MIDI In/Out |
| Power Supply | AC Adaptor (PA-300C) |
| Weight | 11.5 kg |
| Keyboard Type | 61 keys, touch-sensitive |
| Dimensions | 1002 x 148 x 437 mm |
To Next Page
