EasyManua.ls Logo

Yamaha PSR1000 User Manual

Yamaha PSR1000
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Fgfgd
PSR1000/2000
¤¤¤¤¤¤¤¤¤¤¤¤
TOP FEATURES ¤¤¤¤¤¤¤¤¤¤¤¤
Microphone input with Vocal Harmony (PSR2000)
Lyric display for song disks with lyrics
Custom lyric input for User Songs (New)
Notation display (PSR2000) (New)
Large Full Dot backlit LCD screen (New)
“Music Finder” with 500 song selections (New)
“Organ Flutes” with 8 virtual drawbars (PSR2000)
High quality Voices including stereo samples (New)
3 Intros/Endings + 4 Variations/Fills per style
“To Host” port for direct hookup to computer
Pitch Bend and Modulation Wheels
Groove/Dynamics function for Auto Accompaniment
Interactive Help in 5 languages (New)
SYSTEM DATA RESET |
(This will erase any custom settings.)
1) Power on while holding down key furthest to right (C).
PLAYING THE DEMOS |
1) Press [DEMO] to play songs randomly.
2) Use [BACK] and [NEXT] to select a Demo category.
3) Use ‘1’ [^] and ‘2’ [^] to select different pages.
4) Use [A][J] to select an item on a page to demo.
5) Press [START/STOP] in SONG section to stop Demo.
6) From the FUNCTION page, press ‘8’ [v] ‘AUTO’ to
play all Demo items automatically.
7) Press [EXIT] to exit Demo Mode.
PLAYING THE VOICES |
1) Press a category button in the VOICE section.
(Ex. [PIANO & HARPSI.])
2) Use [A][J] to select a Voice. (Ex. ‘GrandPiano’)
3) To layer two Voices, press [EXIT], turn ON [LAYER]
button, press [G] ‘LAYER’, and repeat steps 1 - 2.
4) Play the keys to hear the Voice(s).
5) When finished, turn OFF [LAYER] button.
VIRTUAL ORGAN DRAWBARS (PSR2000) RTUAL
1) Press [ORGAN FLUTES] in the VOICE section.
2) Press [SOUND CREATOR].
3) Use [BACK] and [NEXT] to select ‘FOOTAGE’ page.
4) Use buttons [1][8] under display to adjust drawbars.
PLAYING THE STYLES |
1) Press a button in STYLE section. (Ex.[POP & ROCK])
2) Use [A][J] to select a Style. (Ex. ‘60’sRock 1’)
3) Turn on the [ACMP] button (red LED illuminates).
4) Press [INTRO], then [SYNC START].
5) Play a chord in the left section of the keyboard.
6) Press [ENDING] to finish hearing the Style.
© 2002 Yamaha Corporation of America, 6600 Orangethorpe Ave., Buena Park CA 90620
QS PSR1000/2000 / 2-
© 2002 Yamaha Corporation of America, 6600 Orangethorpe Ave., Buena Park CA 90620
QS PSR1000/2000 / 2-02
02
USING “ONE TOUCH” SETTINGS |
1) Select a Style (see above).
2) The 4 [ONE TOUCH SETTING] buttons will now call
up 4 appropriate Voices for the selected Style.
MUSIC FINDER |
1) Press [MUSIC FINDER].
2) Use ‘2’ [^] and [v] to select a Song.
3) A Style and Voice is automatically set up for the Song.
NOTE: Custom song titles & setups can also be stored.
VOCAL HARMONY (PSR2000) |
1) Plug a 250 ohm dynamic mic into MIC./LINE IN jack.
2) Adjust (INPUT VOLUME) knob on back of unit, while
singing into mic.
3) In ‘MIC.’ section of front panel, make sure [VOCAL
HARMONY] is ON, and [TALK] is OFF.
4) Press [VH TYPE SELECT] to select Vocal Harmony
types.
5) Start a Style playing with a chord (see above).
6) While holding the chord, sing into the mic.
7) Adjust Style Volume by first pressing [BALANCE],
then using ‘2’ [^] and [v] to control the Volume.
PLAYING SONGS WITH LYRICS FROM DISK |
1) Insert a Standard MIDI File (SMF) disk with Lyric data.
2) Press [A] ‘SONG’ button in MAIN screen.
3) Use [A][J] to select a Song.
4) Press [B] ‘Lyrics’ button.
5) In ‘SONG’ section of front panel, press
[START/STOP] to start the Song; the Lyrics will
appear in the display in time with the music.
6) Press [START/STOP] to stop the Song.
PART MUTING & VOLUME CONTROL |
1) Play a Style or Song (see above).
2) To mute / un-mute Parts with buttons [1] [8], press
[CHANNEL ON/OFF] to display ‘STYLE’ or ‘SONG’.
3) To adjust Part volumes with buttons [1] [8], press
[MIXING CONSOLE] to display ‘STYLE’ or ‘SONG’ for
‘VOL/VOICE’ page.
SONG RECORDING (Quick Method) |
In the ‘SONG’ section of the front panel:
1) Press and hold [REC], then press [TOP].
2) Release the buttons, then select a Style and Voice.
3) Press and hold [REC], then press the Track buttons
above it for the Tracks that are to be recorded.
EXAMPLE: [STYLE], [L], or [R].
4) Release the buttons, then play the keyboard to start
recording.
5) Press [REC] to stop recording.
6) To play the Song, press [TOP], then [START/STOP].
7) To stop the Song, press [START/STOP] again.
Question and Answer IconNeed help?

Do you have a question about the Yamaha PSR1000 and is the answer not in the manual?

Yamaha PSR1000 Specifications

General IconGeneral
Speakers2 x 12cm + 2 x 3cm
Weight12.5 kg
Sequencer16-track
Power SupplyAC Power Adapter
Styles160
Display320 x 240 dot LCD
MIDIMIDI In/Out
Keyboard61 keys
Sound EngineAWM (Advanced Wave Memory)
ConnectivityMIDI In/Out
ConnectionsMIDI In/Out
Polyphony32 notes
EffectsReverb, Chorus, DSP

Summary

Copying Files Between Floppy Disks

Copying Specific Files

Steps to copy specific files from a source floppy disk to a USER page, then to a destination disk.

Duplicating Entire Disks

Using the 'DISK TO DISK COPY' feature to duplicate entire floppy disks.

Creating a User Style

Selecting a New Style

Steps to select a new style from scratch or copy parts from existing styles.

Recording an Original Part onto a Channel from Scratch

Procedure to record individual parts onto accompaniment channels.

Saving the User Style

Process to save a created User Style to memory or floppy disk.

Data Will Not Save Properly

Editing Song Track Parameters

Changing the Voice on a Track

Steps to load a song and change the voice for a specific track.

Saving the Edited Song

Procedure to save the song after editing its parameters.

Enabling External MIDI Device Control

Controlling Keyboard Sections via MIDI

Configuring MIDI to control Main, Layer, and Left voice sections remotely.

Controlling Auto Accompaniment via MIDI

Setting up MIDI to control only the Auto Accompaniment section.

Saving the MIDI Setup

Steps to save the configured MIDI settings.

Factory Reset Procedure

Reset System Setup Only

Procedure to reset only system setup data to factory defaults.

Reset All or Selected Settings

Procedure to reset all user data, including registrations and styles, to factory defaults.

Loading Music Finder Files

Making Global Settings for Voices

Turning Off Effects Globally

Steps to disable effects for all voices by editing the 'VOICE SET' page.

Making Songs Play Continuously

Recording and Saving a Song

Quick Recording Method

Steps for recording a song quickly in one or two takes.

Multi Recording Method

Procedure for recording multiple channels or parts one at a time.

Saving the Song

Process to save a recorded song to USER memory or floppy disk.

Recording to Sequencer from External MIDI Source

Saving and Loading Registrations

Saving Registrations

Steps to save single front panel settings (Registrations) and banks.

Loading Registrations

Procedure to load previously saved Registration Banks.

Saving User Voice Edits to Registration Memory

Settings Not Storing with Registrations

Storing Intro and Ending Settings

Changing Settings Temporarily

How to change intro and ending settings for the current style.

Changing Settings Permanently

Procedure to save intro and ending settings permanently as a User Style.

Transposing a Song

Transposing Keyboard Pitch

Using front panel buttons to change the keyboard's pitch.

Transposing a Song Temporarily

Temporarily changing the key of a song using the mixing console.

Transposing a Song Permanently

Permanently transposing and re-saving a song's key.

Using Lead/Harmony Balance in Vocal Harmony Control

Hearing Effect Only (Example)

Example: editing Speedy Mouse effect to hear only the cartoon-like voice.

Saving the Edited Effect

Steps to save modified vocal harmony effects.

Balance Setting

Adjusting the balance between Lead and Harmony sounds.

Related product manuals