What to do if there is no sound from my Yamaha PSR-E223?
First, check that nothing is connected to the PHONES/OUTPUT jack on the rear panel, because when headphones are plugged in, no sound is output. Also check the Local Control on/off.
What to do if my Yamaha PSR-E223 Electronic Keyboard volume is too soft?
If the volume is too soft, the sound quality is poor, the rhythm stops unexpectedly, or the song does not play correctly, the batteries may be low or dead. Replace all six batteries with completely new ones, or use the optional AC adaptor.
Why is there noise when using a mobile phone near my Yamaha PSR-E223?
Using a mobile phone in close proximity to the Yamaha Electronic Keyboard may produce interference. To prevent this, turn off the mobile phone or use it further away from the instrument.
Why does my Yamaha Electronic Keyboard footswitch produce the opposite effect?
The polarity of the footswitch may be reversed. Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power.
What to do if Style does not sound properly on Yamaha PSR-E223 Electronic Keyboard?
Make sure that the Style Volume is set to an appropriate level. Also, check if the Split Point is set at an appropriate key for the cords you are playing and set the Split Point at an appropriate key. Finally, check if the “ACMP ON” indicator is showing in the display. If it is not showing press the [ACMP ON/OFF] button so that it does show.
What to do if the Style or Song does not play back on my Yamaha PSR-E223 Electronic Keyboard?
Make sure External Clock is set to OFF.
Why does my Yamaha Electronic Keyboard sound cut off?
The instrument is polyphonic up to a maximum of 32 notes. If a style or Song is playing back at the same time, some notes/sounds may be omitted (or “stolen”) from the accompaniment or Song.
Why does the sound level not change on my Yamaha PSR-E223 Electronic Keyboard?
This keyboard does not have touch response, so the level of the sound does not change in response to your playing strength.
Why does Yamaha Electronic Keyboard produce a popping sound when turned on or off?
This is normal and indicates that the instrument is receiving electrical power.
Why does playing keys in the right hand area of my Yamaha Electronic Keyboard not produce any sound?
When using the Dictionary function, the keys in the right hand area are used only for entering the chord root and type.
Safety warnings for electrical shock, fire, and hazards.
Precautions for preventing injury and instrument damage.
Connecting AC adaptor or batteries for power.
Connecting headphones, audio devices, and footswitches.
Overview of the instrument's front and rear panel controls and jacks.
Selecting and playing different instrument sounds.
How to select and listen to the instrument's built-in songs.
Using auto accompaniment and rhythm patterns.
Using the metronome and fun sounds for practice.
Navigating functions and understanding the main display.
Step-by-step guidance for learning songs.
Adjusting reverb, chorus, volume, and other voice parameters.
Managing song tempo, mute functions, and practice sections.
Controlling style playback, tempo, and variations.
Customizing instrument parameters and system settings.
Connecting to MIDI devices and computers.
Common problems and their solutions.
A comprehensive list of all available instrument voices.
Details on percussion sounds and key assignments.
An index of all available auto accompaniment styles.
A catalog of all built-in songs.
Technical details and dimensions of the instrument.
Information on product warranty coverage and terms.
General| MIDI-keyboard number of keys | 61 keys |
|---|---|
| Product color | Black |
| Compatible products | GM XGlite |
| Interface | - |
| DC-in jack | Yes |
| Dimensions (WxDxH) | 945 x 348 x 118 mm |
| Power requirements | 12 V |
| Power source type | DC |
| Power consumption (typical) | 12 W |
Weight and Dimensions| Weight | 4500 g |
|---|
To Next Page
