32 PSR-E223/YPT-220 Owner’s Manual
Reference
Voice Settings
Adding Reverb
Reverb adds the ambience of a room or concert
hall to the sound that you play on the keyboard.
Press the [REVERB ON/OFF] button to turn
Reverb on. Reverb is normally on. You can check
how the selected Reverb Type sounds by playing
the keyboard. To turn Reverb off, press the
[REVERB ON/OFF] button again.
The ideal type is automatically selected when-
ever you select a Song or Style, but you can
select any of the available Reverb Types.
1 Press and hold the [REVERB ON/OFF] but-
ton for longer than a second. “REVERB”
appears in the display for a few seconds, fol-
lowed by the Reverb Type.
2 Select the desired Reverb Type by using the
number buttons [0]–[9], [+], [-].
Refer to the Reverb Type list on page 56 for
details.
You can adjust the Reverb depth in the Func-
tion Settings (page 44).
Adding Chorus
This effect makes the Voice sound richer, warmer
and more spacious. The best-suited Chorus type
is automatically selected whenever you select a
Voice; however, you can select any of the avail-
able types.
1 Press the [FUNCTION] button a number of
times until the “Chorus” appears. “Chorus”
appears in the display for a few seconds, fol-
lowed by the Chorus Type.
2 Select a desired Chorus Type by using the
number buttons [0]–[9], [+], [-].
Refer to the Chorus Type list on page 56 for
details.
You can adjust the Chorus depth in the Func-
tion Settings (page 43).
To add Reverb
Select a Reverb Type
ndPno
Appears when
Reverb is on.
Hall2
002
Currently selected Reverb Type
•You can also access the Reverb Type setting display by press-
ing the [FUNCTION] button several times.
Currently selected Chorus Type
Chorus1
001
To Next Page
Loading...
