Yamaha PSR-E223 - Setting the Metronome Time Signature; Setting the Metronome Volume

Voice Settings
36 PSR-E223/YPT-220 Owner’s Manual
Reference
Setting the Metronome Time
Signature
A chime will sound on the first beat of each mea-
sure, while a metronome click will sound on all
others. You can also set the time signature to
“00,” in which case the chime will not sound and
the click sound will be heard on all beats.
1 Press and hold the [METRONOME ON/
OFF] button for longer than a second.
The time signature appears in the display.
2 Set the time signature by using the number
buttons [0]–[9], [+], [-].
The metronome can be set for time signa-
tures of 0 to 15 beats.
Setting the Metronome Volume
1 Press the [FUNCTION] button a number of
times until “MetroVol” appears.
2 Set the metronome volume by using the
number buttons [0]–[9], [+], [-].
• The time signature cannot be changed for Songs and Styles,
because each has a fixed time signature.
TimeSig
004
Time signature
Hold for longer
than a second.
NOTE
MetroVol
100
Metronome Volume