To Next PageTo Next PageWhat to do if Yamaha QY20 displays 'Battery Low'?
If your Yamaha Recording Equipment displays 'Battery Low', replace the old batteries with a new set as soon as possible. Internal data will be retained during the battery replacement.
What to do if my Yamaha QY20 Recording Equipment has no sound?
If your Yamaha Recording Equipment isn't producing any sound, ensure the volume control is set to an audible level. Also, verify that the volume parameters for each track are appropriately adjusted.
How to turn on Yamaha QY20 if it won’t power on?
If your Yamaha Recording Equipment doesn't turn on, check the AC adapter connection to both the outlet and the device. If using batteries, ensure a fresh set is correctly installed in the battery compartment.
What to do if notes are cut off on Yamaha QY20 Recording Equipment?
If notes are being cut off or omitted, it may be because the maximum polyphony of your Yamaha Recording Equipment is being exceeded. Note that the device can play no more than 28 notes simultaneously.
What to do if Yamaha QY20 bulk data is not received?
If your Yamaha Recording Equipment isn't receiving bulk data, check that the device number matches the transmitting device's setting. Ensure that the song play or pattern play display is not active. Also, if you're receiving a 1-song or 1-pattern bulk dump, the selected song or pattern must be empty to receive the data. Bulk data reception is not possible during song or pattern playback.
What to do if playback doesn't start on Yamaha QY20 Recording Equipment?
If playback doesn't begin when pressing the [/] key on your Yamaha Recording Equipment, it could be due to selecting a song or pattern that contains no data. Also, playback cannot be controlled from the device panel when the MIDI Sync parameter is set to “Ext”.
Why does my Yamaha QY20 Recording Equipment have the wrong pitch?
If your Yamaha Recording Equipment is producing the wrong pitch, check that the transpose parameter is set to the normal value, which is “0”.
What to do if Yamaha Recording Equipment playback stops mid-song?
If playback stops in the middle of a song on your Yamaha Recording Equipment, check if an end marker has been inserted in the song. Also, verify whether an ending section of a preset pattern has been inserted in the middle of the song.
Why does Yamaha QY20 change time signature when song starts?
The time signature and pattern changes when the song is started because the time signature and pattern changes have most likely been recorded onto the accompaniment tracks.
What to do if ABC doesn't work on Yamaha QY20?
If the ABC function isn't working on your Yamaha Recording Equipment, first make sure the ABC Zone function is turned ON. Check that the ABC Zone high and low limits are set to appropriate notes. Finally, ensure the cursor is placed at the chord display location.
General| Sequencer Resolution | 96 ppq |
|---|---|
| Patterns | 100 patterns |
| Display | LCD |
| Weight | 1.2 kg |
| Type | Music sequencer |
| Sound Engine | FM synthesis |
| Songs | 10 songs |
| Effects | Reverb |
| MIDI | In/Out |
| Power | 6 x AA batteries or AC adapter |
| Input/Output | MIDI In/Out |
| Power Supply | 6 AA batteries or AC adapter |
