24
Getting the most out of it
Moving a device, macro group or timer group
You can change the order in the Device menu and the Macro menu. Changes you make in
the Device menu are automatically updated in the Home menu.
1 Make sure the device tab or macro tab is active.
The device or macro tab is active when the name of a device, macro or timer is
displayed.
2 Switch to Move mode via the Mode button .
The Remote Control displays the menu.
3 Tap the device or group you want to move.
The menu item is highlighted.
4 Use the Left and Right button to move the menu item up or down.
5 Tap Accept to save the changes.
You return to Use mode.
Note: The item at the top of the device tab corresponds to on the first home menu panel.
If you move the AMP tab down, it is advisable to label with the name of the item at
the top of the device menu.
To Next Page
