34
Appendix
The TV goes blank or the input source changes
• The Device menu item might be programmed to switch the input source. Operate the
device without affecting the input source.
The Remote Control won’t edit, label or delete commands
• If the label locked indicator appears, the device control panels have been locked to
prevent unwanted changes. You cannot modify or delete commands for this device.
• Make sure your devices are appropriately located. Avoid programming the Remote
Control under bright fluorescent light: it might affect the infrared signals.
• Make sure the button you want to edit has a shade. Shadeless buttons cannot be
programmed.
The Remote Control won’t switch modes
• When the batteries are low the Remote Control prevents you from switching to
customizing modes so that no customization can be lost. Replace the batteries.
The Remote Control is low on memory
• The Remote Control displays a message indicating it is time to clean up the memory.
The Remote Control will do this by permanently removing devices and macro and timer
groups you have deleted.
Warning Cleaning up memory can take 10 minutes or longer. Never remove batteries during
the clean-up process. This might damage the configuration file, resulting in loss of
your customized commands..
The configuration file is corrupted
• When this very unlikely event occurs, you have to revert to the original configuration.
All your customized commands devices and macros are lost. You must reprogram your
Remote Control.
Remote Control error messages
• If one of the following error messages is displayed, please contact your dealer or the
YAMAHA customer service:
• Can’t open configuration file
• Configuration file error
• No configuration file found
• Invalid configuration file version
To Next Page
Loading...
