36
Appendix
How do I calibrate the touch screen?
The Remote Control is calibrated when it leaves the factory, so normally you do not have to
calibrate it yourself. It is possible that the Remote Control will display a message requesting
that you calibrate the touch screen. If this message appears, do the following:
You will first see the instruction “Touch TOP LEFT corner” and then “Touch BOTTOM RIGHT
corner”.
1 Tap as close as possible to the upper left corner using the blunt tip of a pencil.
2 Tap as close as possible to the upper right corner using the blunt tip of a pencil.
To Next Page
Loading...
