Need help?Do you have a question about the Yamaha RIVAGE PM7 and is the answer not in the manual?
General| Type | Digital Mixing Console |
|---|---|
| Matrix | 8 |
| Sampling Frequency Rate | 96 kHz |
| A/D and D/A Conversion | 24-bit |
| Signal Delay | 0.5 ms |
| Total Harmonic Distortion | < 0.05% |
| Network I/O | Dante |
| Power Supply | Internal |
| Control Surface | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range | > 100 dB |
| Power Requirements | AC100-240V 50/60Hz |
| Touchscreen Display | Yes |
| Fader Configuration | Motorized |
| Expansion Slots | 4 |
| Input Types | Analog, Digital |
| Effects Processing | Built-in |
Key safety instructions to follow for safe operation and to prevent hazards.
Comprehensive precautions covering power, electrical hazards, water, hearing, and fire safety.
Procedure for safely shutting down the unit and connecting power.
Overview of basic setup, including card installation and configuration.
Procedures for setting unit IDs, connecting devices, and synchronizing the system.
Setting the system word clock and assigning channels to the TWINLANe network.
Guides for patching input channels to jacks and output channels to jacks.
Setting analog gain and routing input channels to the STEREO bus.
Guidance on resolving common problems related to power, audio, and display.
To Next Page
