How to troubleshoot power issues on my Yamaha RIVAGE PM?
To resolve the issue of your Yamaha Music Mixer not powering on, first, ensure all power switches are in the ON position. Next, verify that all AC power cords are securely connected. If the mixer still doesn't power up after these steps, it is recommended to contact your Yamaha dealer for further assistance.
What to do if my Yamaha Music Mixer is not receiving an audio input signal?
If your Yamaha Music Mixer isn't receiving an audio input signal, make sure the cables are properly connected. If you're using an optional card, ensure it's correctly installed.
Why does my Yamaha RIVAGE PM show [ERR P01] POWER A OFF?
If your Yamaha Music Mixer displays the error [ERR P01] POWER A OFF, it means power is not being supplied from power supply unit A. Ensure that the power switch on power supply unit A is turned on and that the power cord is correctly connected to both the unit and power supply unit A.
What does [ERR P02] POWER B OFF mean on my Yamaha Music Mixer?
If your Yamaha Music Mixer displays the error [ERR P02] POWER B OFF, it indicates that power is not being supplied from power supply unit B. To fix this, verify that the power switch on power supply unit B is turned on, and that the power cord is connected to both the unit and power supply unit B.
What does error [ERR T12] TWINLANe T V B OP IP mean on Yamaha Music Mixer?
If your Yamaha Music Mixer displays the error [ERR T12] TWINLANe T V B OP IP, ensure that the cable is securely inserted. Clean both ends of the cable and the connectors on the card using a commercially available cleaning tool designed for fiber optics. If the issue persists, try using a different cable. If these steps do not resolve the problem, contact your Yamaha dealer.
How to fix [ERR T0#] TWINLANe WRONG LOOP error on Yamaha RIVAGE PM Music Mixer?
If your Yamaha Music Mixer displays the error [ERR T0#] TWINLANe WRONG LOOP, the fiber optic cable might not be connected properly. Check the cable connection.
How do I resolve [ERR T0#] CONSOLE NETWK WRONG LOOP on my Yamaha RIVAGE PM?
If your Yamaha Music Mixer displays the error [ERR T0#] CONSOLE NETWK WRONG LOOP, it indicates that the Ethernet cable is not connected properly. Check the cable connection.
What should I do if my Yamaha RIVAGE PM Music Mixer shows [ERR W02] DATA CORRUPT TRY RE-SYNC?
If your Yamaha Music Mixer displays the error [ERR W02] DATA CORRUPT TRY RE-SYNC, it means the mix data inside the unit has been corrupted. Try data syncing again by transmitting data from the control surface.
How to troubleshoot [ERR W01] BNC UNLOCK on Yamaha RIVAGE PM Music Mixer?
If your Yamaha Music Mixer displays the error [ERR W01] BNC UNLOCK, check the external device that is supplying the word clock.
Guidelines for handling product abnormalities and using the power supply safely.
Important warnings regarding unit access, water, fire, and hearing protection.
Procedures for proper handling, maintenance, and saving data.
Information on bundled items, manual usage, and product disposal.
Guidelines for rack mounting and recessed installation to ensure proper ventilation and fit.
Identifies and explains the LCD, indicators, keys, slots, and power switches on the front panel.
Details the various signal, power, and network connectors on the rear panel.
Explains communication ports, indicators, and switches on the rear panel.
Details Ethernet, HY card slots, and related indicators.
Procedures for installing and removing Mini-YGDAI cards.
Instructions for connecting power cords and safely operating the power switches.
Steps to diagnose and resolve power-on and audio input signal problems.
Procedure to reset the unit's internal memory to factory defaults.
Lists error messages requiring attention and potential repair.
Technical details including sampling frequency, power requirements, and temperature ranges.
Provides unit dimensions, weight, and lists accessories/optional items.
Details pin assignments for FAULT OUTPUT and GPI connectors.
Provides detailed diagrams of the unit's physical dimensions.
General| Sampling Frequency | 96 kHz |
|---|---|
| Faders | Motorized |
| Series | RIVAGE PM |
| Type | Digital Mixing System |
| Digital I/O | AES/EBU |
| Networking | Dante |
| Network Audio Protocols | Dante |
| Touchscreen | Yes |
| Control Surfaces | Multiple options |
| Scene Memory | Yes |
To Next Page
